1) Make sure all of your prints are of the correct size in accordance with the dimensions of your book, and are cut with perfect 90 degree corners. Note that some paper cutters do not cut prints to perfectly straight dimensions, and that prints from labs vary in size.
2) Peel back 1” from the top of the cover of the adhesive page and fold down.
3) Lay your print over the page and center it. Line up carefully the top of the photograph on the exposed adhesive. Do not to press down until the position of the top of the print is perfectly lined with the adhesive.
4) Press down the print along the exposed adhesive.
5) With your fingers, gently pull out the release paper while smoothing out the print SLOWLY to avoid bubbles.
6) Using a soft piece of cloth to smooth out the print surface for a few seconds.
7) Wait a few moments for the adhesive to become permanent, and you’re done!
